Nicols TX DMX WS IP Manuel D'utilisation page 11

STRUCTURE DU WDMX
Arrière
8
9
10
11
12
Settings and Operating :
Plug the antenna only with POWER OFF !! Hand screwing will be enough. Unplug to stock, always power off,
- Plug the power câble to switch on your module, this will let you know the current programmed MODE :
Emitter (Tx) or Receiver (Rx).
- To switch MODE : Just unplug the power cord until all leds are Off, then press and keep on the « Function » button while
plugging the power cord again until the module switches On.
Repeat until the chosen mode lits.
- To PAIR modules together ; On the transmitter, keep pushed the « Function » button for 1 second and then release. The
« LINK » LED starts to blink until modules are paired.
Manuel d'utilisation
DMX Output
DMX Input
Power input
prise d'ANTENNE
Bouchon d'aeration
no LED should be lit when mounting/unmounting the antenna.
TX DMX WS IP
DMX for Receiver mode
DMX for Emitter mode
240VAC Power Conn TRUE type
RF link
Only if necessary
5