Awanti TLW16D0W Manuel D'instructions page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPIN ONLY
(Models TLW16W / TLW21PS - Approximately 8 minutes / TLW30W – Approximately 10
minutes).
Press down the power button.
Press the cycle button to select the SPIN function until only SPIN indicator is ON.
Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
Wash
Wash
Program
Type
NORMAL
Normal Use
QUICK
Lightly Dirty
COTTON
Cottons
HEAVY
JEANS
NO SPIN
Delicates
Spin Dry
AIR DRY
Function
NOTE: All automatic wash programs include soak time.
To select one of the pre-programmed automatic wash cycles follow the instructions as shown
below:
Press the power button.
Press the program button to select the appropriate program until the indicator light is ON.
(NORMAL is the default program)
Press the water temp button to select the water temperature. (The default setting is cold water).
Press the water level button to select the appropriate water level setting. (The default water level
is 4 water level)
Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
Close the lid, or the washing machine will buzz during wash and spin cycle.
In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the
washing machine to automatically refill with water to adjust the imbalance.
Note:
Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
If you want to change a selected program, press the POWER button first to turn the unit off, then
press the POWER button again to turn the unit back on, then press the Program button to select
the new cycle before pushing START/PAUSE button.
When the Rinse and Spin functions are ON, do not use detergent.
If you want to drain the water during washing, press the POWER button first to turn the unit off,
then press the POWER button again to turn the unit back on, then select the SPIN function. Press
START/PAUSE button again to restart.
AUTOMATIC WASH PROGRAMS
Water Level
Selection
Default
Range
1 – 6
4
1 – 3
3
1 – 3
3
1 – 6
4
1 – 6
4
1 – 6
4
16
11 Minutes
2
30 Seconds
2 Minutes
1
13 Minutes
1
11 Min
2
30 Sec
11 Minutes
2
30 Seconds
11 Minutes
0
30 Seconds
5
42
1
10
7
39
1 Min
42
10 Sec
00
34
60
60

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Tlw21d2p

Table des Matières