Using The Compact Tire Inflator; Troubleshooting; Maintenance - PRESIDENT MPB-6000 Manuel D'utilisation

USING THE COMPACT TIRE INFLATOR

8 adapters
2 Screw valve
3 4 inch Air Hose
Compact tire inflator with air needle adapters to inflate vehicles, bicycle tires, sports balls, etc.
1. Plug the connector (6) of then compact tire inflator to the 12 V connector (6) of the booster MPB-6000.
2. Connect the appropriate air needle adapter (8) to the compact tire inflator if needed.
3. Connect the screw valve (2) of the compact tire inflator to the item to inflate.
4. Press the ON/OFF button (7) to turn the compact tire inflator on.
5. Check the air pressure on the manometer to avoid over inflation.
6. Press the ON/OFF button (7) again when the item is inflated to turn off the compact tire inflator.
The tire inflator works even if the booster MPB-6000 is off (5).

TROUBLESHOOTING

MAINTENANCE

IF...
My items are not recharging or the
compact tire inflator won't inflate.
I haven't used my booster MPB-6000
since a while, and now the unit is com-
pletely drained.
Use common sense when caring for your MPB-6000. Be sure the connectors and jacks remain clean
and free of debris. Unplug the MPB-6000 after charging. Store the MPB-6000 and its accessories in the
provided carrying case.
1 LED light
4 Manometer
(PSI/bar/KPA)
TRY THIS...
Recharge fully the booster MPB-6000.
Ensure your items are correctly connected.
You may have accidentally put it away with
it powered on. Recharge it.
13
7 ON/OFF button
6 Connector
5 Plug cord