16-661-01 / 16-660-01 / 16-660-02
4.4. Adjusting the image brightness
Modify the image brightness if the display is activated.
Keep push button
pressed to run through the brightness cycle. Brightness cycle:
4.5. Adjusting the image contrast
Modify the image contrast if the display is activated.
Keep push button
pressed to run through the contrast cycle.
4.6. Retrieving the image
By means of
push button , you can retrieve the image of an external unit or external camera. If the system has several external units/cameras, you
can retrieve the image* of the next external unit/camera in row by pressing the button. After viewing the image of the last external unit/camera in row, you
can switch off the image by pressing the button.
(*)NOTE: only the images of the external units/cameras that are programmed on the video internal unit 16-661-01 are visible. For programming, see user
manual electronic control unit 16-651.
5. TECHNICAL DATA
Dimensions ................................ L216 x W180 x H42mm
Weight:....................................... 1350g
Operating temperature: ............... 0 to 40°C
Enclosure: .................................. aluminium (enamelled)
Keys: .......................................... anodized aluminium
Connector: .................................. RJ45
Power supply: ............................. supplied via the RJ45 connection
Video input: ................................ twisted pair 1Vpp composite
Display resolution (pixels): ............ 480 horizontal, 234 vertical
Analog telephone input: ............... line impedance 600_ (only for connection to a private telephone exchange)
Designed according to the TBR 21 requirements
Dialling tone (DTMF)
6. PRODUCT MAINTENANCE
By means of the maintenance tips below, we want to ensure that the surfaces of these luxury products are not damaged by improper use. Damage by
improper use is not covered by the guarantee.
Maintenance tips
- It is sufficient to clean the products with soap and a damp cloth.
- We strongly advise against the use of the following products:
- Abrasive sponges or abrasive detergents;
- Maintenance products that contain solvents or acids, or cleaning products containing acetic acid.
7. LEGAL WARNINGS
- The installation has to be carried out by a qualified person and in compliance with the statutory regulations.
- This user manual has to be handed over to the user. It has to be included in the electrical installation file and has to be passed on to any new owners.
Additional copies are available on the Niko website or via the support service.
- During installation, the following has to be taken into account (not limited to list below):
- The statutory laws, standards and regulations;
- The state of the art technique at the moment of installation;
- This user manual, which must be read within the scope of each specific installation, only states general regulations;
- The rules of proper workmanship
- In case of questions, you can consult Niko's support service or contact a registered control organisation.
Support Belgium:
+32 3 778 90 80
website : http://www.niko.be
e-mail: support@niko.be
In case of a defect, you can return your product to a registered Niko wholesaler, together with a clear description of your complaint (Conditions of use,
stated defect...).
8. GUARANTEE PROVISIONS
- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is no invoice,
the date of production applies.
- The consumer is obliged to inform Niko in writing about the defect, within two months after stating the defect.
- In case of a failure to conform, the consumer has the right to a repair or replacement (decided by Niko) free of charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation, improper or careless use or wrong usage or transformation of the
goods.
- The compulsory regulations of the national legislation concerning the sales of consumer goods and the protection of the consumers in the countries where
Niko sells, directly or via sister or daughter companies, chain stores, distributors, agents or permanent sales representatives, take priority over the rules
and regulations mentioned above.
EN
Support UK:
+44 1525877707
http://www.nikouk.com
sales@nikouk.com
min.
Contrast cycle:
min.
max.
max.
9