Konyks Priska USB Guide Rapide page 6

6
QUICK INSTALLATION
1. Download Konyks APP by scanning the QR
Code on page 2
2. Use a Smartphone running Android or iOS
3. Connect your Smartphone to a 2.4 Ghz Wi-Fi
network only
4. Activate bluetooth
5. Insert Priska into a wall socket
6. Open the Konyks APP and register if you
haven't already
7. The button LED should blink rapidly. Otherwise
reset the socket by keeping the button pressed
for +/- 10 seconds until the LED blinks rapidly
8. From Konyks APP click on the
right of the screen to add a device
9. Wait
automatically suggest the installation of your
plug
10. Select the device to install
11. If required, enter your Wi-Fi password and click
Next
12. Wait 10 to 15 seconds for install. Your device is
now ready to use
a few seconds,
+ at the top
the APP should