Astro Pneumatic Tool 600ST Instructions D'entretien

PRODUCT INFORMATION:
• Punch designed for easy replacement
• Performs hole punching and panel crimping
• Features a rotating head for convenient use
• Every pull of the lever delivers a single punch or a single
flange crimp with precision control
• Forms an offset crimped edge on sheet metals
for no-bump lap welds
• Lightweight
• Durable construction
• Reduces metal fabrication time in half
SPECIFICATIONS:
600ST
Punch Diameter: 5.5mm (7/32")
Punch Capacity: 1.6mm (1/16")
Crimping Capacity: 1.6mm (1/16")
Piston Stroke: 5/32" (4mm)
Overall Length: 10" (254mm)
Net Weight: 3lbs. (1.36kg)
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 4cfm
Air Pressure: 90-120psi
600ST
(5.5mm)
600ST8
(8mm)
600ST8
8mm (5/16")
1.6mm (1/16")
1.6mm (1/16")
5/32" (4mm)
10" (254mm)
3lbs. (1.36kg)
1/4"
3/8" (10mm)
4cfm
90-120psi
STRAIGHT TYPE PUNCH / FLANGE TOOL
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor's name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
When unpacking, check the parts diagram and part number
listing on page 4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
IMPORTANT
STRAIGHT TYPE PUNCH / FLANGE TOOL
Page 1
Unpacking
MADE IN TAIWAN