Usage - Inventum SVM2600 Mode D'emploi

4

usage

The control unit of the appliance is located on the outside. Check that the voltage corresponds with what is stated on the
information plate and insert the plug in the socket.
Instruction: the recommended temperature setting is 4°C. For the freezer section this is -18°C.
Instruction: The amount of food, the ambient temperature, the frequency of opening the door and the position
of the appliance have an effect on the temperature in the appliance. The temperatures in the refrigerator can differ
from the temperature on the display. Take this into account when setting the thermostat.
Control panel on the outside of the door
SETTING THE TEMPERATURE OF THE COOLER SECTION
Press on the control panel on the key ZONE CHOICE to change the temperature of the appliance. The symbol of the
cooler section lights up. Press the key SET TEMP until the desired temperature is shown in the display. The temperature of
the cooler section can be set between 2°C and 8°C.
The temperature is set in the following sequence:
SETTING THE TEMPERATURE OF THE FREEZER SECTION
On the control panel, press ZONE CHOICE to change the temperature of the freezer section. The symbol of the freezer
section lights up. Press the key SET TEMP until the desired temperature is shown in the display. The temperature of the
freezer section can be set between -14°C and -24°C.
The temperature is set in the following sequence:
After setting the temperatures, the appliance continues to cool until the set temperatures have been reached. Allow the
appliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After this, you are able to fill the
appliance with food.
If the ambient temperature rises, set the appliance to a lower temperature position in order to be able to guarantee the
interior temperature.
SUPER FREEZING
Use this mode to quickly freeze food that is not yet frozen. In order to be able to freeze fresh food quickly, the temperature
of the freezer section should be lowered timely in advance. It may be necessary to activate the super freezing mode 24
hours in advance.
When this mode is selected, the temperature of the freezer section automatically drops to -24°C for a maximum period
of 52 hours. After 52 hours the temperature of the freezer section returns to the preset temperature.
To activate the super freezing mode, press the key SUPER until the light lights up on the display. To switch off the mode,
press the key SUPER until the light no longer lights up.
ECO MODE
This mode helps prevent energy waste when the refrigerator is not used as normally, such as during your holidays. When this
mode is selected, the temperature of the freezer section is automatically set to -17°C and the cooler section is set to 6°C.
To activate the ECO MODE, press the key ECO MODE until the symbol lights up on the display. To switch off the mode,
press the key ECO MODE until the symbol no longer lights up.
27
English •