Safety - GMC-I PRO SyS CP 305 Mode D'emploi

1. SAFETY

The following symbols appear on the products:
Do not dispose of this product as unsorted
municipal waste. Contact a qualified
recycler for disposal.
Attention! Refer to Manual
Double/Reinforced Insulation
Application around and removal from
HAZARDOUS LIVE conductors is
permissible
Complies with the relevant European
standards.
Read all instructions completely before
using this product.
Underwriters' Laboratory Inc.
recognised component
To avoid electric shock:
• Use caution during installation and use of this
product; high voltages and currents may be present
in circuit under test.
• This product must be used only by qualified
personnel practising applicable safety precautions.
• Do not use product if damaged.
• Always connect probe to display device before it is
installed around the conductor.
• Always ensure the probe is removed from any live
electrical circuit, and leads are disconnected before
removing the battery cover.
• Do not hold the probe anywhere beyond the tactile
barrier see FIG 1.
3