MediSure DG001MM-MULTI Guide De Démarrage Rapide

Multi User Meter (DG001MM-MULTI)
QUICK START GUIDE
BATTERY INSTALLATION
1. Press down Battery Cover and slide right.
2. Firmly inser t battery with positive ( +) side up.
SET DATE AND TIME
1. Press and hold the "S" button for 3+ seconds
2. Y ear flashes. P
3. Press the "S" button. Month flashes in the top left. Press the ">" or "<" buttons until
the correct year is displayed.
4. Repeat Step 3 for the Day, Hour (24 hours) and minutes.
5. Press the "S" button. Meter will display "SET" and turn off.
Date and time is now set.
BEGIN TESTING
Wash hands with
warm water and dry.
Single Use, Auto Disabling Lancet
VIEW TEST RESULTS
1. Press the "M" button to turn on the meter. Press the "M" button again.
2. Last test results are displayed. Press "<" and ">" button to toggle results.
3. Press "M" button a third time to see 7, 14, 21, and 28 day averages.
4. Press "S" button to turn off Meter
Follow usage Instructions carefully. Use only with an auto-disabling, single use lancing device. A new pair of clean gloves
should be worn by the user before testing each patient.. Carefully follow cleaning and disinfection protocols between each use
+
uttons until the correct year is displayed.
Put on Gloves and Prepare
1-855-MDI-SURE (855-634-7873) • WWW.MEDISURE.CA
This Blood Glucose Monitoring System has been Licensed
by Health Canada for Multi Patient Use . It is intended for
use by health care professionals on multiple patients. It is
cer tified as safe to use for over 18,000 tests and in-
between cleaning protocols.
BACK
Battery Cover
Serial Number
Inser t MediSure test Apply blood sample.
strips in meter. Results in 6 seconds!
FRONT
The MediSure Meter
LCD Display
Test Results & Messages
Main "M" Button
Power on/Memory Recall
Settings "S" Button
Set Date & Time, Power off
Test Strip Port
Insert test strip blue side up.
Meter stays on for 3 min.
1. 2. 3. 4.
5.
Perform In Between
Cleaning Protocol
after each use
12-25 20:00
6.0
mmol/L
1. Month
2. Day
3. Hour
4. Minute
5. Year