Installation - Maxima 09378010 Mode D'emploi

INSTALLATION

1 The appliance must be positioned on a flat, stable, heat resistant and non-flammable surface.
2
When positioning the appliance, maintain at least 2 meters (6 foot) distance from walls or other
objects for safety and ease of use.
3
Position the appliance in such a way that smoke and heat can easily and safely dissipate.
4 During assembly only loosely tighten the bolts at first, then fully tighten when assembly is complete.
Do not over tighten the bolts, this may cause damage to the appliance or bolts.
5 Install the required parts & accessories according to the following steps.
6 Make two X shaped braces by placing one support bar in the recess along the other (similar sized)
support bar and fix in place. Pay close attention to the positioning of the curved ends on the top brace.
7
Attach the 4 legs to the braces and mount the wheels. Fix the wheels in place with the supplied cap
nuts and washers. (fit wheels with brakes on adjacent corners).
8
Place the undercarriage in upright position and put the main body on-top.
9 Place the firebox, charcoal plate & cooking grid inside the main body.
10 Mount the top exhaust and fix in place.
11
Attach the handle to the lid.
12 Attach the table brackets to the main body and fix in place with the (domed) cap nuts.
13 Mount the tables by inserting the table hinge into the corresponding table brackets.
14 Check the lid hinge and tighten the bolts if necessary.
6