Problem Solvers MisMatch IS II Brake to SRAM Shifter/Dropper Instructions page 2

MISMATCH IS II BRAKE TO SRAM
4. Now place the MisMatch Adapter in the clamp of the Shimano brake lever
where you removed the spacer (fig. 4).
Figure 4
5. Attach the entire assembly to the handlebar using the Shimano bolt that
came installed with your Shimano brakes and a 4mm hex wrench (fig. 5).
Figure 5
6. When you've positioned the shift and brake levers where you want them,
torque the brake lever clamp bolt according to Shimano's specifications.
Torque the MisMatch bolt to 2.8–3.4 Nm.
7. Repeat for the opposite lever (if applicable).
8. Enjoy your single-clamp solution!
ONGOING MAINTENANCE
Periodically check to make sure attachment bolts are properly tightened
to the handlebar.
6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
580799 5/20 | 85-001221_INST_A
SHIFTER/DROPPER INSTRUCTIONS
®
A LIMITED 2-YEAR WARRANTY
PROBLEM SOLVERS
defects in materials and workmanship for two (2) years from the original date
of retail purchase by the consumer. This limited warranty is expressly limited
to the repair or replacement of the original product, at the option of PROBLEM
SOLVERS, and is the sole remedy of the warranty. This limited warranty
applies only to the original purchaser of the PROBLEM SOLVERS product and
is not transferable.
In no event shall PROBLEM SOLVERS be liable for any loss, inconvenience
or damage, whether direct, incidental or consequential or otherwise resulting
from breach of any express or implied warranty or condition of merchantability,
fitness for a particular purpose, or otherwise with respect to this product except
as set forth herein. This warranty gives the consumer specific legal rights, and
those rights and other rights may vary from state to state.
This warranty does not cover the following:
• Damage due to improper assembly or follow-up maintenance or lack of skill,
competence or experience of the end user
• Products that have been modified, neglected, used in competition or for
commercial purposes, misused or abused, involved in accidents or anything
other than normal use
• Installation of components, parts, or accessories not originally intended for
or compatible with Problem Solvers product
• Damage or deterioration to the surface finish, aesthetics or appearance
of the Problem Solvers product
• Normal wear and tear
• Labor required to remove and/or refit and re-adjust the product within the
bicycle assembly
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE
EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES
OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
warrants this new PROBLEM SOLVERS product against
™