Eaton E5-248-C1420 Mode D'emploi page 8

WARNING
THIS UNIT CONTAINS A LITHIUM BATTERY AND MUST NOT BE DISPOSED
OF IN A FIRE OR EXPOSED TO TEMPERATURES BELOW -20 C OR
ABOVE +70 C.
WARNING
Installation and maintenance must be carried out by suitably qualified
personnel only. Hazardous voltages may be present on the connection
terminals.
Installation
This product is intended to be installed in accordance with the operating and
installation requirements of Overvoltage Category II and Pollution Degree 2 (as defined
by IEC 664).
It must be fitted in a suitable enclosure which is accessible to qualified personnel only.
The relay output circuits must be fitted with fuses suitable for the voltage and current
being switched.
Maximum fuse ratings:
250V AC @ 8A cosØ= 1
250V AC @ 5A cosØ= 0.4
30V DC @ 8A cosØ= 1
All conductors carrying hazardous voltage should have external switching or
disconnect mechanisms fitted which provide at least 3 mm of contact separation in all
poles.
Failure to install or operate the unit in accordance with the above requirements
may result in the electrical safety of the unit being impaired.
Maintenance
Ensure that all power sources to the unit are isolated prior to maintenance,
inspection or cleaning.
There are no user serviceable parts inside this unit. Under no circumstances should
the case be opened.
All external wiring connections should be inspected at regular intervals. Any damaged
wiring should be replaced and any loose connections should be retightened.
Cleaning should be carried out using a dry cloth to wipe the casing of the unit.
8
fuse rating 8A
fuse rating 5A
fuse rating 8A
MN05405001E