Assembly - XPower Rotary Sieve Manuel

Assembly

1. Attach the handles to the rotary sieve. Disengage the drum by releasing the safety chain
(10).
2. Set the rotary sieve upright by holding on the handles and pushing your foot against the
bottom bar.
3. Hook the drogue (13) from booth sides on the provided hooks (12).
4. Fold down the bracket for the collection bag (5). Wrap the hook and loop fasteners
around the bracket. The rotary sieve is now assembled.
5. Connect the extension cord with power mains and the power plug. The rotary sieve is
now ready for use.
When using extension cables, make sure that plug and coupling are splash-proof.
Only use extension cables with a minimum cross section of 16 AWG that are approved
for outdoor operation.
6. Make sure the rotary sieve stands as horizontally as possible.
With the bolt (11) you can adjust the inclination angle for the drum.
At the beginning adjust the drum as horizontally as possible.
4