1.
GENERAL
This instruction booklet that integrates and is and essential part of the product, is handed from the installer to the customer, who keeps it with care
to be used for any other consultation.
This instruction booklet should always accompany the product in the event in which it is sold or transferred.
This product has been built to heat and accumulate water for sanitary uses; therefore is must be connected to a heating system,
solar panels and to the water distribution system, accordantly to its performances and power.
Any other use is to be considered incorrect and therefore dangerous for people, animals and/or things.
Installation must be performed in keeping with the enforced norms and according to the manufacturer's instructions reported on this booklet: a
wrong installation could cause damages to people, animals and/or things, damages of which the manufacturer is not liable for.
Damages caused by installation errors or use or due to the inobservance of the manufacturer's instructions, exclude any contractual or non-
contractual liability of the manufacture.
Before installing the product, verify that the technical data corresponds to what is requested for the correct use in the system.
Verify also that the product is undamaged and that it has not been damaged during transport and movement operations: do not install products
that have been damaged and/or are faulty.
Use only original accessories supplied by the manufacturer for all the products (including the electrical ones).
When installing do not disperse the packaging in the environment: all the materials are recyclable and therefore must be carried to the appropriate
recycling areas.
After removing the package make sure that all the packing elements (staples, plastic bags, expanded polystyrene, etc.) are not left within reach of
children as they are a potential source of danger.
In the event of a breakdown and/or faulty functioning of the product deactivate it and refrain from all attempts of repair or direct intervention: refer
exclusively to qualified personnel.
The eventual repair of the product will have to be made using original spare parts.
Provide to a periodical maintenance of the product according to the program specified in the specific section of this booklet.
A correct maintenance of the product allows it to work in the best conditions with respect to the environment and in total safety
for people, animals and/or things.
Incorrect maintenance of both the modalities and timing may be source of malfunctioning or danger for people, animals and/or
things.
Before carrying out any cleaning or maintenance operation, disconnect the appliance from the supply network and//or through
appropriate interception organs.
The manufacturer advises customers to refer to qualified Service Centers or fitters as these are trained to carry out the aforesaid operations at the
best.
2.
DESCRIPTION
WHPS BA SS is a vertical floor-mounted water heater with one coil exchanger and can be connected to independent heating systems, central
heating systems, systems for district heating or be used in solar systems with forced circulation as well.
WHPS BA DS is a vertical floor mounted water heater with double coil exchanger suitable both when connected to thermal solar collectors
in which the solar panel converts the energy potential into sanitary hot water; and when there is a need to fraction the exchange surface in
consideration of a remarkable fluctuation of needs.
Both models have a dimensioned coil exchange surface in order to supply great productions of hot water. The lower part of the exchanger, folded
towards the bottom, allows to heat completely the water volume contained in the accumulator.
The thermal insulation is made with high density polyurethane foam and elevated thickness in order to guarantee an optimal thermal insulation.
14