Comedes BTR 50 Mode D'emploi page 41

Masquer les pouces Voir aussi pour BTR 50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
Display messages:
Code
Temperature sensor defective.
E1
Humidity sensor defective
E2
Ambient temperature <5°C
CL
Ambient temperature >38°C
CH
Ambient air humidity <20
LO
Room air humidity ≥95%
HI
The fuse blows all the time.
The RCD (FI) circuit breaker trips continuously. Stop operating and contact us at:
service@comedes.com
The power cord or plug becomes disproportionately warm.
Stop the operation and contact us at
service@comedes.com
There are objects or water in the device.
Stop operating and contact us at: service@comedes.com
Attention: Switch off and disconnect the device immediately and contact customer
service if anything unusual happens.
This product must not be disposed of with household waste. This dehumidifier
must be returned to a recycling point for electronic and electrical equipment.
You can obtain further information about the relevant collection points from your
local or city administration or from Comedes GmbH.
EN-20
Cause
Follow
Cycle: 30 minutes
dehumidification, 15
minutes defrosting.
Cycle: 30 minutes
dehumidification, 15
minutes defrosting.
Device switches off
Device switches off
Device switches off
Device continues to
operate normally
Solution
Please contact us at:
service@comedes.com
Please contact us at:
service@comedes.com
Wait until the temperature is
back in the permitted
working range.
Wait until the temperature is
back in the permitted
working range.
Wait until the humidity has
increased.
www.comedes.com

Publicité

Table des Matières
loading

Table des Matières