Télécharger Imprimer la page

Goobay SET CC Serie Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

User's Manual for
LED transformers
Read the instructions carefully and completely. It is part of the product and contains important notes for use. Keep this document!
Safety Instructions
Risk of life by electric shock
Risk of self-intervention and misuse
Instructions for mains separation
Risk of injury by tripping and falling
Risk of injury by inappropriate ambient
conditions
Risk of material damage by improper
product combination
Material damage by improper
methods
Description and Function
Your product is a voltage converter, converting mains voltage to low voltage and eg. can be used in furnitures. The SET LED transformer serie
is characterized by constant output voltage, the SET CC serie by constant output current, what your LEDlighting protects and prolongs their
lifespan. The compact design fits almost anywhere.
Transformer housing
Terminals
Mounting slot
Seconrady side with cap
(Connecting of LED lighting)
Primary side with cap
(mains connection)
Intended Use
Constant-current transformers of the SET CC series are primarily made for series circuits. With varying the number of LEDs, the secondary voltage
also varies up to the specified maximum. Constant-voltage transformers of the SET LED series are primarily made for parallel circuits. With varying
the number of LEDs, the secondary current varies, too. Only use the product like described in chapter Description and Function. Use it only in dry
ambience. Other use is not permitted. Misuse will void the warranty and liability.
Connecting and Operating
1.
Compare all products to be compatible to each other.
2.
Attend to the Safety Instructions and the VDE notes.
3.
Turn off the mains fuse and check with a voltage tester to be sure, all lines are really stress-free. If in doubt, a electrician must do the
installation work.
4.
Leave 50 mm space around all dimensions of the transformer when installing.
5.
First, connect the secondary circuit (SEC) by removing the cap with a suitable Phillips head screwdriver.
6.
Now you can see 2 free terminals at the secondary side.
7.
Connect your LED lights in correct polarity to the terminals of the secondary circuit (SEC).
Alternatively connect lamps with DC plug to the DC jack, if existing.
For calculating the total power (P in Watt) of your LED lighting combination, multiply the current of your LED lighting (I in Ampere) with its voltage
(U in Volt). Therefor this applies: P=U*I.
>>
In Parallel circuits, the voltage (U) stays constant.
>>
In Serie circuits, the current (I) stays constant.
8.
If all LEDs are connected to the secondary side right way, connect the primary circuit (PRI / 200-240 V AC) with its 2 terminals N and
L on to the electricity grid.
9.
Reattach the cover caps and tighten them.
10.
Fix the product by the 2 mounting holes on a firm, safe surface, if needed.
11.
Turn the mains fuse on.
The voltage transformer works when a voltage is applied on the primary side. It does not have its own switch and is maintenance-free.
Pillmannstraße 12 | 38112 Braunschweig | Germany
Avoid contacting mains voltages!
Do not modify or alter either the product or the accessories!
Do not open the housing.
Attend to the delivered VDE Notes!
Install the product at an easily accessible place.
Place, transport and install product, parts and acceories in a safe way.
Not suitable for children and people with physically and / or mentally
limited capabilities.
Only use in dry ambiance.
The specifications of all used products must match or be within the
specified range.
Use product, product parts and accessories only in perfect condition.
3/8

Publicité

loading

Ce manuel est également adapté pour:

Set led serie3060030601306023060330604 ... Afficher tout