Glacier bay VWD2266W-1 Guide D'utilisation Et D'entretien page 11

Care and Cleaning (continued)
clEANING THE INSIDE OF THE DISPENSER
To prevent mineral deposits that can affect the taste and flow of the water, and to ensure proper product performance, clean your water
dispenser every 4 months.
□ Unplug the power cord and switch off the heating power switch (B) at the rear of the unit.
□ Remove the water bottle and bottle support collar (A).
□ Drain the reservoirs (see "Draining the Reservoirs").
□ Pour a water dispenser cleaner (not included) or a mixture 4 cups (1 L) of vinegar with 4 cups (1 L) of hot water into the reservoir and
wait 20 minutes. If using a water dispenser cleaning solution, please follow the manufacturer's instructions.
iMPOrTanT: To avoid water overflow while cleaning the dispenser, always remove the bottle support collar (A) before pouring water or
cleaning solution into the reservoir.
□ Press both dispensing buttons (D and E) until water no longer comes out.
□ Drain the reservoirs.
iMPOrTanT: Collect the water into a container, not the drip tray.
□ Rinse with clean water.
□ Replace the bottle support collar (A) and the water bottle (see "Installing the Water Bottle").
GOING AWAY ON vAcATION
When not using the dispenser for long periods of time or when going on vacation, conserve energy by unplugging the dispenser and draining
the reservoirs (see "Draining the Reservoirs"). Upon return, follow the initial product cleaning procedures before using the dispenser.
11
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM