Publicité
Les langues disponibles
Les langues disponibles
moulding board should be 1 cm. Then you are ready to fix the front and rear wall gable mouldings. Simply
fix in both ends the boards to the side gable mouldings and in the middle to the roof supports (DS).
Roof cover material (Some house options do not include it in the kit!)
Cut the roof felt in accordance with the roof length into suitable pieces. The felt should extend from the
edge by approximately 2-4 cm. Attach the roof felt to the roof boards with the supplied felt nails at
intervals of about 15 cm. Make sure that the felt strips overlap by at least 10 cm. Having installed the roof
covering material, fix it with the roofing felt fillets (DPL 1 and DPL 2) on the edge of the gable moulding
Publicité
