Buffalo DF825 Mode D'emploi page 6

EN
Technical Specifications
Model Voltage
220-240V
DF825
50Hz
Electrical Wiring
This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
Caterlite parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent,
and federal authorities.
Caterlite products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Buffalo.
Every effort is made to ensure all details are correct at the time of going to press, however, Buffalo reserves the right to
6
DF825_ML_A5_v2_20220713.indb 6 DF825_ML_A5_v2_20220713.indb 6
Power Power
Current
(max.) range
3000W 13A 100-3000W
change specifications without notice.
Temperature Dimensions
range h x w x d (mm)
60-240°C 84 x 338 x 418
Weight
6.6 kg
2022/7/13 15:31 2022/7/13 15:31