Automatic cleaning mode
EN
1. To use the automatic cleaning mode, pour 750ml of water into the
device, add a small amount of dishwashing liquid, put the cover on, and
then press the key (3c, fig. 2).
2. After 60 seconds the device will turn off automatically. Rinse the device
under running water and let it dry off.
How to use a glass jar
1. Put ingredients into the jar.
2. Carefully lock the jar with a lid (fig. 3).
3. Place the measure in the lid hole (fig. 4).
4. Select speed by setting the knob in a desired position (fig. 2).
Note: Do not let the device operate continuously for more than 1 minute.
Let the device cool down and reach room temperature before another use.
Note: It is advisable to cut food into smaller pieces before you put them
into the jar. Do not mix large amounts of food at a time.
After use
1. Switch the device off and unplug the power cable.
2. Remove the lid and measure from the jar.
3. Remove the jar and its base from the blender.
4. Disconnect the jar base from the blending tip.