marklin 6646 Mode D'emploi page 6

2. Connecting the Transformer
Make sure that the power cords for all of the transformers
used with your layout are disconnected from the household
current before connecting a transformer to the layout!
Possible Uses for the Transformer
Train operation with AC current for Märklin H0 or 1.
Conventional hookup of turn o uts and signal mechanisms.
Conventional hookup of model railroad lighting.
Feeder Tracks
K Track: 2290 + 74041
Feeder Wire Sets
C-Track: 74041
Feeder Wire Sets
1-Track: 74044
6
Preparing the wire and making connections with it
2 3
1
Pay particular attention when doing this
Connect the red third rail wire from the feeder track to the
red terminal clip ("B" = track power) on the 32 VA Transfor-
mer. Then connect the brown ground return wire from the
feeder track to the brown terminal clip ("0" = ground) on the
32 VA Transformer  Figure 1, page 30.
Important!
!
The feeder wires from the layout to the transformer
must never be plugged into a household power
outlet. Make sure your children are aware of this
danger!
5
4