Publicité
Les langues disponibles
Les langues disponibles
Operating Manual
SmartTerminal ST-1044
1
Advantages of the
SmartTerminal ST-1044
•
Chip card reader in accordance with PC/SC specification
•
EMVCo approval (EMV2000 Level 1 Type Approval)
•
Omnikey CardMan 3121 compatible
2
Connection of the SmartTerminal to the
PC and installation of the software
2.1 Microsoft Windows 98/Me/2000/XP/Vista/7
1 Place the CHERRY CD in your CD-ROM drive.
The CD-ROM starts automatically.
2 If the CD-ROM does not start automatically, double-click
the CD-ROM drive in Windows Explorer and then the
Start.exe file.
3 Follow the installation instructions on the screen.
4 Restart the PC.
5 Connect the USB plug of the CHERRY SmartTerminal
with the USB port of your PC.
2.2 Linux/Mac/Windows
Install the PC/SC driver from the CHERRY CD selecting
the folder "drivers".
For a CT-API, special synchronous APIs or OCF drivers,
click the folder "software".
3
Disposal
Dispose of the old unit via a collecting point for
electronic scrap or via your dealer.
2
4
Contact
ZF Friedrichshafen AG
Electronic Systems
Cherrystraße
91275 Auerbach
Germany
www.cherry.de
E-mail: info@cherry.de
Telephone:
Sales: +49 (0) 180 5 243779* (0180 5 CHERRY*)
Technical support: +49 (0) 180 5 919108*
(*14 euro cent/min. from German landlines, prices may vary
for calls made from mobile networks.)
Please have the following information on hand when
contacting technical support:
•
Item and serial no. of the product
•
Name and manufacturer of your system
•
Operating system and, if applicable, installed service
pack version
5
General Advice
CHERRY, a brand of ZF Friedrichshafen AG, continuously
optimizes its products as new technologies are developed.
For this reason we reserve the right to make technical
alterations. The evaluation of product reliability and the
definition of the product's technical performance are carried
out according to our own requirements in order to meet
internationally recognized regulations and standards.
Requirements in addition to these can be met through
mutual cooperation. Improper usage, handling, storage and
external influences could lead to faults and defects during
use.
We do not accept warranty for defects caused by alterations
to our product by the user and shall not be held liable for
unauthorized modifications. All repairs must be made by us
or an officially appointed organization or person.
Possible compensation claims against
ZF Friedrichshafen AG or its nominated officers – whatever
the legal justification including physical or stress related
injuries – are excluded. Exceptions to this exist in the case
of intent or gross negligence on the part of
ZF Friedrichshafen AG, infringements of Product Liability
Law or in cases of injury, bodily harm or risk to health. These
operating instructions only apply to the accompanying
product.
Full details can be obtained from your distributor or direct
from us.
Publicité
