DC IN - Connect the 5V/2A power adapter ( spec: 3.5mm, DC 5V ) to this port.
HDMI OUT- Using the HDMI cable provided, connect the receiver to the HDMI Input of any HD
display device (HDTV, projector).
MINI USB INPUT PORT - HID Remote Control function is supported when it is connected to the
mini USB input port of a mouse or keyboard.
SYNC BUTTON - Press the Sync Button button for 5 seconds , the receiver will begin to connect.
Network Status Indicator -
ON:The wireless network connection between
the transmitter and receiver successful.
FLASH SLOWLY: Transmitter is ready
to connect.
FLASH RAPIDLY: The device is
not connecting.
SETTING UP THE RECEIVER
1.
Install the mounting bracket to the bottom of the receiver by lining up the mounting
hole with the screw on the top of the mounting bracket. Rotate the screw on the mount
clockwise until until it is secure.
2.
Set the receiver to the proper angle and tighten it into place by turning the knob on the
side of the mount clockwise until it is secure.
CONNECTING THE RECEIVER
1.
Connect the receiver to the monitor using the HDMI cable, plug the IR Extender into the IR
input of receiver.
2.
Wait for 5 to 10 seconds, the network and video indicators will light up, confirming that the
Basic Function video connection is successful.
RECEIVER
SETUP
HDMI CABLE
HDMI
HDMI
POWER SUPPLY
- 5 -
Video indicator -
ON: The video source connection is successful.
OFF : The video source has failed to connect.
IR Sensor - The remote control is aligned to
the IR Extender Input of receiver when using.
TELEVISION
IR RECEIVER