Hathaway BG3403 Instructions D'assemblage page 4

THANK YOU! ASSEMBLY INSTRUCTIONS
PART 1 - ATTACHING THE NET
1. Join the three Round Silver Tubes together - swaged ends fit into one another and lock forming one
Assembled Tube.
.
2 Slide Assembled Tube through the opening in the top of the Net Header.
3. Insert hooks of the Net Harness into each end of the Assembly Tube.
4. With the Net now attached to the Assembled Tube and Net Harness, place Net Harness over the
basketball hoop rim flush with backboard.
5. A. Take the two hanging Net Harness straps and thread them through the slits in the Net Header.
B,C. Tie these straps behind the backboard to any fixed supports or brackets and tighten firmly. Note: for adjust-
able basketball systems, make sure the straps do not restrict the hoop movement or the adjustment mechanism.
A
B
C
FRONT BACK