Installation Instructions - Magic Chef MCL40PFRT Manuel D'utilisation

INSTALLATION INSTRUCTIONS

When moving the freezer, the unit should ALWAYS be kept as upright and level as possible to protect the
compressor and refrigeration system. Allow the unit to sit for at least 4 hours after moving before plugging in and
starting. Position the freezer in a dry and well ventilated area, away from direct sunlight, heat sources, and any
corrosive gases or materials. DO NOT place in a spot wear it can get rained on or wet.
The operation of the freezer depends on heat being moved out of the cabinet into the air via the condenser, so be
sure to remove all packing material and allow at least 6" of clearance around the unit.
Plug the unit into a properly installed and grounded 120V outlet or a 12V/24V socket. The manufacturer is not
responsible for any damage due to being connected to an improper electrical supply.
After transporting the unit, let the unit sit for at least 4 hours to allow the fluids in the refrigeration system to
settle. Failure to do so may result in the unit not cooling properly or malfunctioning. ALWAYS keep the freezer as
level and upright as possible when moving.
Position the freezer in a dry, well-ventilated area away from sunlight or sources of heat, as well as any corrosive
materials or vapors. DO NOT install in a location where the freezer may get wet.
7