Redmond RI-C220-E Mode D'emploi page 3

Carefully read all instructions before operating the unit and save them for future
reference. By carefully following these instructions you can considerably prolong
the service life of your appliance.
IMPORTANT SAFEGUARDS
• The manufacturer is not responsible for injuries
caused by failure to comply with the safety require­
ments and operation rules of the appliance.
• This appliance is intended to be used for nonin­
dustrial use in house hold and similar spheres of
application: staff kitchen areas in shops, offices
and other work ing environments, farm houses, by
clients in hotels, motels and other residential envi­
ronments. Industrial application or any other mis­
use will be regarded as violation of proper service
conditions. Should this happen, manufacturer is
not responsible for possible consequences.
• Before plugging in the appliance ensure that the
circuit voltage matches operating voltage of the
appliance (see technical specifications or manu­
facturer' s plate on the appliance).
• Use an extension cord designed for the power con­
sumption of the appliance as the parameter mis­
match may result in a short circuit or fire outbreak.
• Use only earthed electric sockets as this is an ob­
ligatory safety requirement. Use an earthed exten­
sion cord as well.
• Unplug the appliance after use, while cleaning or
moving. Remove the power cord with dry hands
holding it by the plug, not cord.
• The appliance should not be remained unat­
tended until it is unplugged.
• The appliance should be unplugged when filling
the water tank.
CAUTION! The appliance is heated during
operation! Do not touch the soleplate during
and immediately after its operation. Use spe-
cial ironing surface. Do not leave the plugged
in appliance unattended, unplug it immedi-
ately after the use.
• Do not place the cord in doorframes or by heat
sources. Do not twist or bend the power cord, en­
RI-C220-E GBR
3