Motorola T605 Mode D'emploi page 33

Problem
I paired my
device with
the car kit,
but now the
car kit won't
connect with
it.
I cannot
voice dial a
call.
Resolution...
• Your device has been manually
disconnected from the car kit. Initiate a
Bluetooth connection from the device as
described in "Automatic Connection" on
page 20.
• Repeat the initial pairing process (see
"Initial Pairing" on page 18.
• The Bluetooth feature in your device has
been turned off. Follow the directions in
your device's user manual to turn it back
on.
• You may not have a "voice tag" set up for
the number you want to dial in your
phone. Follow your device's user manual
to set up voice dialing.
• Background noise may be interfering
with your voice. Relocate the
microphone to a quieter place. Move the
microphone closer to the driver.
Passengers in the car should be quiet
while voice dialing. Minimize wind noise
by rolling the windows up.
• Most phones prompt with a beep to
indicate it is now time to speak. Wait
until the beep has ended before
speaking. Do not over speak the beep.
Appendix A — Troubleshooting 31