Publicité
Les langues disponibles
Les langues disponibles
4. How to assemble tray and legs support (see fig. 5):
•
Adapt leg supports and tighten up long bolts (O) and nuts (M).
NOTE: required to guarantee suitable stability.
•
Press keys in the lower part on both sides of the tray and adjust to elbow
rests. Choose 1 of 2 available tray adjustment levels (see fig. 6).
•
Fasten 5-point safety belts and make sure the belts buckle works properly.
•
Put the child in, adjust belts to the child and lock the buckle. For increased
safety, fasten the crotch interlock by connecting the crotch belt to the tray.
•
Install the tray hooks on the back legs of the chair (see fig. 7).
5. Safety belts assembly and disassembly (see: fig. 8):
1.
Put the shorter belt with the buckle into the slot in the seat.
2.
Put the safety harness into the remaining slots in the seat.
3.
Put the additional crotch belt into the slot in the seat.
4.
Connect shoulder belts and lap belts.
5.
Put the child in the seat and fasten the belts.
6.
Connect the crotch belt with the tray.
6. How to clean and store:
•
Do not expose the chair to sunlight for a long time.
•
If the set includes pillows must not be dry-cleaned or ironed. Machine wash
at 30ºC
•
For cleaning, use soft cleaning agents.
•
Frequently check the chair for damage and loose components.
•
Wipe the seat with a wet cloth.
•
Do not use abrasives.
•
In case of any dirt on the tray, you can wash it in the dish washer.
•
Stop using the chair if you have detected any damage.
•
Protect against moisture.
The pictures are for reference only. The real design of products
may differ from the pictures presented.
‑ 7 ‑
EN
Publicité
