Publicité
Les langues disponibles
Les langues disponibles
· Drill 4 holes on concrete according to the countersunk holes. The holes
must have a depth of at least 10 cm / 4". Make sure that all on ground base
holes align with the drilled holes in the concrete. Note: the concrete must
have a thickness of at least 15 cm / 6" (20 cm / 8" for balcony and/or rooftop
applications).
· Insert the expansion bolts (4x) into the countersunk holes and tighten by using
the allen wrench.
· Align the holes of the tube of your outdoor umbrella with the on ground base
holes. Insert the stem bolts (5x) and tighten by using the allen wrench to
secure. Note: The tube is always included with the umbrella.
· Slide the cover over the tube (optional). Refer to outdoor umbrella manual for
further installation and operating instructions.
8
Publicité
