Press ZOOM button continuously, the picture zooms in by 125%,150%,200% or zooms out by 75%, 50% the original size. Press
this button once more when the picture getting 50% size to return to the normal play. If the picture is enlarged, you may use the
navigation buttons to view blocked parts of the picture.
COLOR AND BRIGHTNESS ADJUSTMENT (FOR THE LCD SCREEN)
Press SCREEN ON/OFF button on the remote control to adjust the color intensity and brightness respectively.
Press and hold this button for a moment to open or close the TFT display.
EXTERNAL MEMORY MEDIA OPERATION (USB&SD/MMC CARD)
Prepare the player for External Memory media operation
1. Slide the POWER switch to ON position, plug a USB data traveller filled with Audio/video files into the USB port or Insert the
SD/MMC card into the card slot, the USB or the SD/MMC card is successfully detected and read after a few seconds, at the
same time, the TV screen will show all its folders.
2. You may play the files stored in the storage media much in the same way as you do the Mp3 disc.
Note: Press and hold STOP button to make change between USB/SD/MMC card and disc.
CAUTION: To avoid electronic static discharge, don't touch the USB port and card slot during playback.
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to modify, press PLAY/PAUSE button to confirm, setting page with
further setting items displayed shows on the TV screen. Again use navigation buttons to make changes. Press again
PLAY/PAUSE button to confirm modifications.
3. Use navigation buttons to switch to another setting on the main setting page.
4. Press SETUP button to exit main setting page.
1. GENERAL SETUP
G E N E R A L S E T U P P A G E
T V D IS P L AY
P S
L C D M O D E
W ID E
O S D L A N G
E N G
S C R E E N S AV E R
O N
E X IT S E T U P
1.1 TV DISPLAY - it is used to select the TV scan mode, please set as per your TV set.
Options: Normal/PS
Normal LB
Wide
1.2 LCD MODE - it is used to select the LCD mode.
Options: 4:3
16:9
1.3 OSD LANG - it is used to select different On Screen Display language for different user.
1.4 SCREEN SAVER - when the player is not in used for several minutes, a running DVD logo will move across the TV screen to
protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
2. AUDIO SETUP
A U D I O S E T U P P A G E
D O W N M IX
S T R
E X IT S E T U P
2.1 DOWNMIX
Options: LT/RT- Left/Right mix mode
STEREO- Select this option if you don't have a 5.1 channels amplifier.
3. VIDEO QUALITY SETUP
All manuals and user guides at all-guides.com
5