Télécharger Imprimer la page

Sound Devices MP-1 Guide De L'utilisateur page 5

Préamplificateur pour microphone

Publicité

MP-1 Préamplificateur pour microphone
Guide de l' utilisateur et informations techniques
FCC Statement
This device has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
CE Conformity Statement
Manufacturer' s Name:
Manufacturer' s Address:
declares that the product:
is in conformity with:
Document No.
EN55103-1 (1997)
EN55103-2 (1997)
EN55022 (1995)/
CISPR 22 (1997)
EN61000-4-2 (1995)/
IEC1000-4-2 (1995)
EN61000-4-3 (1995)/
IEC1000-4-3 (1995)
EN61000-4-4 (1995)/
IEC1000-4-4 (1995)
EN61000-4-6 (1996)/
IEC1000-4-6 (1996)
Tested by:
February 3, 1999
Matthew Anderson
Director of Engineering
Warranty
Sound Devices, LLC warrants the MP-1 Microphone Preamplier against defects in materials and workmanship for a period of ONE (1) year
from date of original retail purchase. Sound Devices, LLC will repair or replace the product at its discretion at no charge. Warranty claims
due to severe service conditions will be addressed on an individual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE
EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY.
Because some jurisdictions do not permit the exclusion or limitations set forth above, they may not apply in all cases.
For all service, including warranty repair, please send the MP-1, along with proof of purchase date to:
Sound Devices, LLC
Service Repair
300 Wengel Drive
Reedsburg, WI 53959 USA
Page 5
Declaration of Conformity
According to ISO/IEC Guide 22
Sound Devices, LLC
Sound Devices, LLC
300 Wengel Drive
Reedsburg, WI 53959 USA
MP-1 Professional Microphone Preamplifier
Description
Emissions standard for product family audio devices for professional use
Immunity standard for product family audio devices for professional use
Radiated and Conducted emissions, Class B
ESD – 6kV contact, 8kV air-discharge
Radiated RF Immunity, 10 V/m, 80% 1 kHz amplitude
modulation
EFT/Burst, I/O lines, +/- .25 kV to +/- 1.0 kV
Conducted RF Immunity, 10 V, 80% 1 kHz amplitude modulation
L. S. Compliance, Inc. Cedarburg, Wisconsin
©1999-2000 Sound Devices, LLC

Publicité

loading