WOLFF FRASMASTER 230 V Traduction Du Mode D'emploi Original page 11

4.3 Support Roller (picture D)
The support roller is adjustable while milling knob fl oors
(G). Please, adjust the support roller (H) that way, the roller
is driven between the knob rows.
Warning
Make sure that the machine locks into
its upper rest when you release the
handle. Other-wise you might cause an accident and
eventually damage the blade. Always use a new, sharp
blade. Blunt blades will give unsatisfactory results and
will put stress on the machine.
5.0 Changing the blade
5.1 Removing the blade (picture E)
► Remove the upper thumb screw (H) of the blade cover.
► Loosen the thumb screw (I) at the bottom of the blade
cover.
► Remove blade cover upwards.and press spindle lock.
► Loosen tension screw (K) with the fork wrench sup -
plied.
► It is a left-handed thread!
► Remove fl ange. and blade and clean fl ange prior to
refi tting a new blade.
5.2. Fitting a new groove blade (picture E)
Fit only a genuine replacement blade:
#036275 Original grooving blade 3,3 mm semicircle
#013461 Grooving blade Combi 5 mm
#013460 Diamand grooving blade 3,8 mm elliptical
► The fi tting of the new blade has to be done the other
way.
► Insert new blade with attention to moving direction.
► Put back on the fl ange and Retighten tension screw.
► Tighten the knurled screw (H, I)
Warning
Under no circumstances should the
machine be operated without the cover in place.
5.3 Spare parts
Spare parts are available on the Internet:
http://webcatalog.wolff -tools.com can be found.
6.0 Trouble shooting
Trouble Eventual cause
Machine does Power supply
not work disconnected
Blown fuse
Defective cable or
plug
Undue force Blade is blunt
necessary
to achieve a
groove
Motor worn
Excessive
Tooth of the blade
vibration
broken
Bad grooving Guirs clogged
7.0 Guarantee
The guarantee period for new Wolff machines is one year
from the time of delivery/transfer to the customer, unless
another period applies pursuant to mandatory legal regu-
lations.
When making a claim under guarantee, the invoice and/or
proof of purchase must be provided.
All repairs covered by the guarantee must be carried out
by a Wolff service shop recognised by us. Repairs
which are carried out by the customer and/or improperly
automatically lead to a disentitlement from guarantee
claims. The same is true of improper operation and/or use.
Replacement of parts, accessories and other changes
to Wolff machines
Wolff machines provide users with a high degree of safety
and reliabiity. To maintain this, the condition of your
Wolff machine may not be changed from that on the date
EN
Elimination
Have machine
repaired by a
qualifi ed electrici-
an resp. change
parts
Change blade
Return machine
for service and/
or repair change
blade
Clean rollers
11