Tylo Elite Cloud Mode D'emploi page 15

Calender
Date and calendar program
Day program
In order to be able to use the Calendar
functions for the Sauna and Combi
heaters, and also the Tylarium installation,
a door switch is required for EU region,
connected to the door (Tylö part no.
90908035). It is also needed in order to
use WiFi with a sauna heater and Combi
heater.
While setting the calendar function you
can create programs for individual dates
or programs that repeat every week.
Confi guration: System settings.
During Confi guration there is both information
about the system and the possibility to adapt
and set various functions and parameters. It is
also possible to confi gure additional equipment
(such as for example fragrance pumps or extra
lighting).
When Confi guration is touched, the screen shows a menu
with a number of separate sections. IN order to see more
rows, put your fi nger on the screen and draw it up or down.
Only the Wifi menu is described in this quickstart guide.
Overview program
In order to be able to use Wifi for the sauna and Combi
installation, a door switch must be connected.
You connect to your WLAN under the Network menu. Bear
in mind that the position where the control panel is located
affects how well it can communicate with the wireless
network. Many kinds of material disturb the wifi signal. Before
fi xed installation of the control panel, check the signal strength.
To do this, start the system and go into Network. Available
networks will be displayed with a relative signal strength
indicated in % after each name. The signal strength must be at
least 60%. Otherwise a new access point or repeater must be
installed near the Elite panel. The local network must be set on
the 2.4 GHz band and only on channel 1-11.
The system supports WPA/WPA2 personal SSID+password
(max. 20 characters). In order to connect to your local network,
fi rst activate Wifi and press Network. Then press Scan which
searches for the accessible networks. In order to connect,
press on the desired network; if a password is required press
on Password, enter the password and then press Connect. In
order to connect mobile applications or PC applications refer
to the app instructions on the Tylö web site (https://www.
tylohelo.com/en/control-panel-tylo-elite).
Under Name you can name your system. A default name is
present to begin with, and this depends on the system you
have. In order to change or alter the name, press it and a
keyboard will appear for editing.
Elite Cloud automatically re-connects to the selected WLAN
if connection is lost. When the system is connected, the WiFi
symbol lights up on the Home screen.
15
EN