oneConcept DiaScanner 979GY Mode D'emploi page 27

• Once you press SCAN button in live view, the edit menu will appear. When you press EN-
TER button, the current image will be saved to internal memory or memory card (when
there is a memory card inserted). The display will return to live view again.
Memory full: Once the images in internal memory or memory card is full, a memory full
•
icon will be shown on screen when you press the SCAN button. You will then have to down-
load the images to a PC or replace another memory card for continued capture.
• Press LEFT/RIGHT button to go to theplayback mode, or access the main menu by the
pressing the Home icon/MODE button at any time. Press the ENTER to confirm.
• Once you enter playback mode (default to slide show), the screen will automatically display
all images stored in the internal memory or memory card with 2 seconds interval from the
previously captured image. You can also stop the slide show by pressing the ENTER button
(Only the images captured by the film & photo scanner are available in playback mode)
Playback & Edit
27