Renkforce 1604208 Mode D'emploi page 4

Care and cleaning
• The product does not require any maintenance, never take it apart.
• Disconnect the product from the power supply before cleaning. Unplug the wall plug
transformer from the mains socket (all network connections will cease to function). Also,
remove the RJ45 and the RJ11 cable.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fiber-free cloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data (for each extender)
a) Extender
Input voltage .................................................5 V/DC
Ports for data transfer ....................................1 Port RJ45 (10/100 MBit), 1 Port RJ11 (VDSL)
Operating temperature ..................................0 to +45 °C
Storage temperature ......................................-20 to +90 °C
Humidity during operation ..............................10 - 90 % RH (non-condensing)
Dimensions (W x H x D) ................................approx. 75 x 23 x 102 mm
Weight ...........................................................approx. 203 g
b) Wall plug transformer
Input voltage ..................................................100 - 240 V/AC, 50-60 Hz
Output voltage/current ...................................5 V/DC, 2 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1604208_V1_1017_02_mxs_m_en