Publicité
Les langues disponibles
Les langues disponibles
0
TRI
SYS sarl –
300 rue des arts et métiers, 21410 PONT-DE-PANY
2
3
5.3.2 Replacing the Battery
Remove the battery with a small screwdriver following the steps shown in the diagram below and
follow the instructions in 5.3.1:
Insert the battery with the positive pole above!
WARNING! RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN
INCORRECT
TYPE
BATTERY.
ACCORDANCE WITH THE INSTRUCTIONS.
6. Troubleshooting
ion and initial use
6.1 New or existing installation
• If the receiver functions at a shorter distance relative to the sensor, it is subject to interference
or use outside the transmission range.
• Search the system environment for changes that could cause the interference (for example
movement of metallic cabinets, furniture or partitions).
• Use the sensor or receiver in a more suitable location.
• Clear the receiver and perform a new learn process.
• Please note that there is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
6.2 Limitation of the range of the radio signals
• Transmitter/receiver used close to metallic objects or close to materials containing metallic
elements. Observe a distance of at least 10 cm.
• Humidity in the materials.
• Devices emitting high frequency signals such as audio and video systems, computers,
electronic ballasts or fluorescent tubes. Observe a distance of at least 0.5 m.
6.3 Contacts
E-mail: ............................
contact@trio2sys.fr
TOC2008NUaa_0121
4
1
2
3
DISPOSE
OF
BATTERIES
USED
7. Declaration of conformity
This product can be marketed and distributed in the countries of the European Union. Hereby
0
TRI
SYS declares that radio equipment 10020083.xx is in compliance with directive
2
2014/53/EU, known as the RED Directive.
The full text of the EU declaration of conformity is available at the following internet address:
www.trio2sys.fr
IN
D.Girard
4/4
Publicité
