Avidsen 103625 Mode D'emploi page 2

GB
STICK LIGHT 4 LEDS
Cod. 103625
Its modern design will perfectly fit in your house with
a pleasant and efficient light. Thanks to its function-
al support, this aluminium LED light can be positioned
both vertically and horizontally. The magnetic base can
be fixed, screwed or glued on metallic surfaces (fixing kit
included). This light can be easily directed on its turntable
support. Ideal for illuminating shelves, wardrobes, kitch-
ens, a workbench...
PRECAUTIONS WHEN USING BATTERIES
• Only use batteries of dimensions and voltage indicated .
• Make sure that batteries are inserted in the correct po-
larity, as indicated in the battery compartment. Inserting
batteries in an incorrect polarity will cause damage to
the apparatus.
• Do not mix different types of batteries, like alkaline and
carbon-zinc batteries.
• If you do not expect to use the detector for a long period,
remove the batteries to avoid damage due to leakage
or batteries fluid.
DESCRIPTION
1
2
3
4
1 ON/OFF Button
2 LED
3 Magnet
4 Support base
3
CONTENT
No. 1 Led Bar
No. 1 Magnet base
No. 3 Screws
No. 1 Double-sided tape
TECHNICAL CHARACTERISTICS
• Light source: 4 white Leds
• Luminous intensity: 14 Lumens
• Power supply: 4.5V – 3xAAA 1.5V LR03 (not supplied)
• Switching on/switching off: manual via ON/OFF button
• Material: Aluminium- ABS
• Indoor use only
INSTALLATION
Product installation is very easy and immediate. Support
base can be fixed under shelves or cabinet with the dou-
ble-sided tape (included) or the screws (included). Its
magnet base can be fixed on metallic surfaces without
need of drilling holes.
To screw the base, unscrew and turn the convex side to
the left, then screw the flat base to the surface.
A B
The LED bar can be positioned on the base horizontally or
vertically thanks to the magnet on one of the two vertices.
The slim shape also makes it perfect as a portable light.
ADDITIONAL INFORMATION
Cleaning and maintenance
• Do not clean the light (LED Light) with abrasive or
corrosive substances.
• Use a slightly damp soft cloth.
• Never spray anything onto the product as it may damage
the internal workings.
• Always use the apparatus in a dry place
WARRANTY AND ASSISTANCE
This product is covered by 2-year legal warranty of
seller for conformity defects as provided for by articles
128 and subsequent of Legislative Decree no 206/2005
(ConsumerÆs Code). ATTENTION: The warranty is not
valid without receipt or proof of purchase.
The warranty does not cover damage caused by ne-
gligence, knocks or accidents. This product must not
be opened or repaired by any person not employed by
Avidsen, except to insert or replace the batteries.
Any physical intervention on the product will void the
warranty.
Technical Assistance: Tel: + 33 (0)892 701 369
Monday to Friday, 9 AM to 12 PM and 2 PM to 6 PM.
INFORMATION TO USERS
Pursuant to Article 13 of the Legislative Decree No.
151 dated 25 July 2005, "Implementation of Di-
rectives 2002/95/CE, 2002/96/CE and 2003/108/
CE, concerning reduction of use of dangerous
substances in electric and electronic devices, as well
as disposal of waste". The symbol of the crossed out
garbage bin found on the device or on its packaging
indicates that the product, at the end of its service life,
must be disposed of separately from other waste. The
user shall bring the equipment at the end of its lifetime
in places dedicated to collect electrical and electronic
waste, where foreseen.
www.avidsen.com
V1