Basic Features; Reject; Redial; Call History - JabloCom Essence Guide De L'utilisateur

3. BASIC FEATURES

REJECT

When phone is ringing just press . You will reject the incoming call.
When you are calling you can use

REDIAL

Press to open the list of recently dialled phone numbers. Press
the number.

CALL HISTORY

To see All calls you can press . To see Missed calls press
If is flashing red you have a missed call. If
missed call from contact stored under the Hotkey.

HANDS-FREE CALLING

Dial the number (don't pick up the receiver), press the
and talk.
If you have a regular call on the receiver, press
receiver on hook. If you want to switch the call to handset again pick up the receiver. You will end
the hands-free call by pressing or
During hands-free calling the lights up.
You can start hands-free calling directly when you choose required contact in phonebook
and press . You will accept a call on hands-free by pressing

CALL AND RINGER VOLUME

Use the and buttons during the call to raise or lower the call volume. When you are
not calling, these buttons change the ringer and sounds volume.

MUTE

Time to time you need to ask your colleague and do not want the other caller to hear it. In this
case, mute the phone's microphone by pressing
button again and continue in phone conversation.
LED light of will be flashing when the private conversation is active.

SILENT PROFILE

Press and you will not be disturbed by incoming calls and messages. If someone calls you,
only the top right LED will be flashing and you will see the call on display.
Active silent profile profile is signalised by steady LED
Pressing during ringing mutes just the call ringing.
to end this call.
once more to dial
again.
is flashing red too you have
and wait for the other party to pick up
and phone will switch to hands-free. Put the
.
.
and start private conversation. Press the
.
- 6 -

4. ADVANCED FEATURES

CONFERENCE CALL

Join up to six people into a conference call easier than ever before. Simply call the first person
and add more callers one after another.
Setting up a conference call
Call the first participant as usual and ask him to wait for a moment. Press
c and select another caller. Confirm by
onference
joined. Repeat to add more callers.
Private talking during the conference call
You can privately talk to a single caller during a conference call. Press
# and choose from a list of all conference callers. To end the private call and get back to
conference, press and select Join calls.
You can release one or more callers from the conference call in a similar manner. During
a conference call press , select r
eleASe
You can also ask the other party to simply hang up their receiver.

CALL TRANSFER

The call transfer function allows you to forward the active call to another phone number.
If you want to transfer current call to someone else, press
list and confirm by . Wait for connection to the selected contact. Both parties will be put
trough once you hang up.
To cancel the transfer process press
Some of the advanced call functions will not work properly
unless they are supported by your GSM operator.

CALL WAITING

The call waiting function indicates an incoming call even when another call is in progress.
To use the call waiting function, please check that you have activated it.
Press > S > c > c
ettingS AllS All

CALL DIVERT

In case you are leaving for a longer period of time, divert incoming calls to a colleague or your
mobile phone. Press > S > c
ettingS AllS
All calls Diverts all incoming calls.
If busy When someone calls you and you speak to someone else.
If no answer When someone calls you and you do not answer the call for 5 to 30 seconds.
You will set the time when you activate this divert.
If unreachable When someone calls you and the phone is OFF or it has no signal.
Cancel all diverts Cancels all call diverts.

MESSAGING

When you receive a message, a notification will be shown on the display. Long press
open the message. Use the to scroll down. Other common tasks like Reply, Forward,
Delete or number saving and message details are available under
, select
and wait for calls to be established and
and select p
# and choose from a list of all conference callers.
, choose the contact from the
and get back to the first caller.
w .
Aiting
> c to set up.
All divert
.
- 7 -
rivAte
to