Starlyf NO FAT GRILL Mode D'emploi page 4

device from the mains to prevent electric shock.
- Do not use the device if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- This device is not suitable for outdoor use.
- Keep the work area clean and well lit. Cluttered
and dark areas invite accidents.
- Place the device on a flat, stable, horizontal
surface.
- Raise the lid with care to avoid burns.
- WARNING: This electrical device comes
equipped with a heat function. Therefore,
surfaces with this function (unlike functional
surfaces) can reach high temperatures.
Because temperature is perceived differently by
each person, this device should be used with
CAUTION.
- Hold the device only by the handle and use
oven gloves or similar heat protection. Let the
device cool down before touching its other
surfaces.
The Set Contains:
Starlyf® No Fat Grill
Plastic fat tray
Instruction manual
Free recipe book
Components (fig.1)
A. Handle
B. Non-stick grills (heating plates)
C. Plastic fat tray
D. Pilot light
Instructions for Use:
Before use:
- Remove the Starlyf® No Fat Grill from the package.
- Before using the Starlyf® No Fat Grill for the first time,
4
clean the non-stick grills (B), as described in the cleaning
section.
Use:
- Prepare the dish you are going to cook with the Starlyf®
No Fat Grill.
- Plug the Starlyf® No Fat Grill into the mains.
- The power pilot light (D) will come on.
- To heat the plates faster, we recommend closing the
Starlyf® No Fat Grill during the process.
- When the light goes off, the Starlyf® No Fat Grill has
reached the right cooking temperature.
- Completely open the Starlyf® No Fat Grill.
- Place the plastic fat tray (C) under the opening.
- Place the ingredients on the bottom plate.
- To grill on both sides, close the Starlyf® No Fat Grill by
lowering the upper plate.
- During the grilling process, fat from cooked food slides
down the grill and drips into the plastic fat tray for healthier
eating.
NOTE: During the cooking process, the pilot light will
come on and go off while the thermostat keeps the plates
at the right temperature.
- After a few minutes, open the Starlyf® No Fat Grill to see
if your meal is ready.
- During the cooking process, the pilot light will come on
and go off to indicate that the temperature of the heating
plates is evenly maintained.
- When your dish is ready, remove it from the Starlyf® No
Fat Grill with plastic or wooden utensils only. Do not use
pointed or sharp objects that could scratch and damage
the coating.
- Unplug the Starlyf® No Fat Grill from the mains and
clean it.
Cleaning and Maintenance
- Unplug the device from the mains and let it cool down
before cleaning it.
- The Starlyf® No Fat Grill can be wiped down inside and
outside with a soft cloth (fig.2).
- Clean the non-stick grills (B) with a damp cloth and a few
drops of washing-up liquid and then dry.
- Do not clean the inside or outside with abrasive scouring
pads or steel wool, as they may damage the surface.
- IMPORTANT! The Starlyf® No Fat Grill is not dishwasher
safe. Do not pour water directly on the Starlyf® No Fat