nest Thermostat E Guide D'installation page 14

10. Connect wires
Use the wiring diagram you got from the
compatibility checker in step 4 to connect
your system wires to the Nest Thermostat.
3/8 in
The exposed wire should be straight.
Note: If you have an R, Rc or Rh wire,
you can put it into the R connector on
the Nest Thermostat.
If you have a W2, Y2 or O/B wire, you
can put it into the O/B connector,
*
if needed.
Gently tug each wire to check
they're secure, and make sure
each connector that has a wire
stays down.
After all the wires are securely
connected, push them down
to make sure they're flush with
the base.