Throttle Cable Adjustment; Clutch Cable Adjustment; Reverse Cable Adjustment; Storage And Cleaning - Vito Agro VIMEDTD7A Mode D'emploi

Throttle cable adjustment

1. Unscrew the throttle cable fixing screw;
2. Pull or release the throttle cable according to the
desired adjustment;
3. Tighten the throttle cable fixing screw while holding
the cable in the desired adjustment position;

Clutch cable adjustment

There are 3 clutch adjusting screws: The screw attached
to the gear shift lever, the screw (15) attached to the
shift lever and the screw placed in the middle of the
throttle cable (16) to a more accurate adjustment.

Reverse cable adjustment

If reverse adjustment is required, use the screw (30)
coupled to the reverse gear handle.

Storage and cleaning

Cleaning
The tiller must be thoroughly cleaned after each use.
Careful handling protects the equipment and extends
its service life.
Before cleaning, let the machine cool down completely.
Storage
Never store the equipment with diesel in the tank.
Depending on the region and storage conditions, diesel
can deteriorate and oxidize, causing damages in the
carburetor and fuel system, difficult starts and clogging
caused by particle accumulation.
If you have stored the tiller with diesel in the tank, to
avoid difficult starts, comply with the following
recommendations:
Less than 1 month:
▪ Follow the usual procedure;
1 month to 1 year:
▪ Empty all diesel from the tank;
▪ Run the engine until it stops due to lack of fuel;
Over to 1 year:
▪ Empty all diesel from the tank;
▪ Run the engine until it stops due to lack of fuel;
▪ Change the engine's oil;
52

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment in your
household waste!
Waste such as used oil, fuel, lubricant, filters and
wearing parts can harm humans, animals and the
environment and as such must be properly disposed of.
Make sure that the deactivated equipment is forwarded
for disposal in a technically correct way.
You can obtain information regarding the disposal of
the tiller through the person in charge for the recycling
in your city.

CUSTOMER SERVICE

Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Site: www.centrallobao.pt