Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Earmuffs
Item no. 1437615
Intended use
These earmuffs protect the wearer against noise (provided that they are worn correctly and
used with care). They reliably filter high-frequency noise in very loud surroundings such as
workshops and factories with loud machinery, and prevent excessive noise exposure when
using chain saws or other similar equipment. This product conforms to the requirements
stipulated in appendix II of the European directive 89/686/EWG. This is indicated on the
earmuffs.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Earmuffs
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
above. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Using the earmuffs
• Unfold the headband and pull it until it clicks into place.
• Place the earmuffs over your ears, ensuring that the headband sits on top of your head.
• The sealing rings should completely cover your ears and be in contact with your head.
• If necessary, adjust the headband to fit your head by bending it into shape. Ensure that the
seal is sufficient to provide effective noise reduction.
• Put the earmuffs on before entering a noisy environment and leave them on until you are no
longer exposed to noise.
• These earmuffs conform to the size requirements stipulated in EN-352-1:2002 and are
suitable for the majority of users.
Protection against noise cannot be guaranteed if you do not observe the insulation
specifications listed in the "Technical Data" section.
*Union harmonisation legislation EN352-1:2002 Hearing protectors-Part 1:Ear-muffs and
certified.
*PPE Regulation (EU) 2016/425, and Essential Health and Safety Requirements through a risk
assessment for the same end use.
#2797 and BSI#0086, The Notified Body number of BSI Group The Netherlands B.V. with
NB#2797 and BSI#0086. Proceed quality control program under Module C2 plus supervised
product check at random intervals of European Regulation (EU) 2016/425 via BSI.
Care and cleaning
• Clean the exterior of the product regularly with soapy water.
• Do not immerse the product in water.
• Never use aggressive detergents or other chemical solutions, as these could damage the
casing or even impair the functioning of the product.
• Allow the product to dry thoroughly before using it again.
• The earmuffs must be disinfected every 3 months by using alcohol to disinfect all components
that come into contact with the user.
• Store the earmuffs in a clean and dry plastic container (bag or box) when you are not using
them.
Disposal
This product must not be disposed of in normal household waste. At the end of its
service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Insulation specifications at different frequencies:
Frequency (Hz)
63
Average insulation
17.1
value (dB)
Standard deviation (dB)
3.2
Assumed insulation
13.9
value (dB)
Product materials .......................... Acrylonitrile butadiene styrene (ABS),
polyvinyl chloride (PVC), polyoxymethylene (POM)
SNR value .................................... 29 dB H:33.0dB M:26.0dB L:17.0dB
Standard ....................................... EN352-1:2002
Operating conditions ..................... -5 to +45 °C, 10 - 85 % RH (non-condensing)
Storage conditions ........................ +5 to +45 °C, 10 - 70 % RH (non-condensing)
Dimensions (W x H x D) ............... 125 x 150 x 95 mm (folded)
Dimensions (W x H x D) ............... 130 x 180 x 95 mm (unfolded)
Weight .......................................... 237 g
Model no. 1437615
CE Test: INSPEC
CE Approved: BST Group
Declaration of Conformity download: www.conrad.com/downloads
BSI Dutch office contact details are:
Notified Body number 2797
Address – BSI Group the Netherlands B.V.
Say Building, John M. Keynesplein 9, 1066EP
Amsterdam
Netherlands
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
125
250
500
1000
2000
11
19.9
27
33.1
35.4
1.9
1.9
1.9
2.4
2.7
9.1
18
25.1
30.7
32.7
*1437615_v5_1019_02_DS_m_(1)_4L
4000
8000
35.2
35.2
2.6
3.2
32.6
32
Publicité
