Martinelli CARRELLO BOOK 51 S Mode D'emploi page 11

Please note that the eyelets open (fig_f).
WARNING! If this operation is not performed correctly,
the basket will not properly hold the weight.
Attach the basket tabs to the grey buttons on the front of
the frame (figure).
6 FIXED OR SWIVEL FRONT WHEELS Book 51 S: to fix the
front wheels, rotate the lever counter clockwise to the
locked padlock (fig_a); to release the wheels, turn the
lever clockwise to the unlocked padlock (fig_b). On
difficult terrain, we recommend using fixed wheels.
7 BRAKE: Press the lever down to apply the brake on the
chassis and lift it to release the brake.
8 ADJUSTABLE HANDLEBAR: To adjust the height of the
handlebar, press both of the side buttons at the same
time (fig_a) and swing it into the desired position
(fig_b), then release the buttons.
9 FOLDING UP: The chassis can be folded up without
the seat, with the seat facing the person pushing
(recline the backrest before folding it) or with the seat
facing forward. To fold the stroller, it is best to set
the front wheels to their fixed position and close the
hood (if fitted). Place the handle as shown in the figure
(fig_a).
Pull the inside handle on the base (fig_b) and lift it (fig_c);
the handle will drop forward until the frame is closed.
10 To ensure the frame is closed properly, check that
the side fastener is enabled (fig_a). When closed, the
frame remains in the upright position (fig_b).
11 For greater compactness, it is possible to remove the
wheels.
To remove the rear wheels: pull outwards on the lever
located under the rear bar and remove the wheels as
shown in figure (fig_a).
To remove the front wheels: press the tab as shown, and
remove the wheel (fig_b).
TRANSPORT: the stroller can be carried comfortably
locking the front wheels and grasping the main handle
(fig_c).
GANCIOMATIC SYSTEM
12 Ganciomatic is a fast and practical system that allows
you to attach the Navetta bassinet unit, the Primo
Viaggio car seat or the Seggiolino Pop Up seat to the
Ganciomatic Base of the chassis in one quick step.
Place the item on the Ganciomatic Base and press
down with both hands until it clicks into place.
Always apply the chassis or stroller brake before
attaching and removing products (refer to the
respective instruction manuals).
Check that the child transport unit is properly
attached.
SERIAL NUMBERS
13 Information about the production date can be found
on the Carrello Book 51 S.
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
MARTINELLI IS A PEG-PÉREGO
TRADEMARK.
Peg Perego SpA adopts a quality management
system certified by TÜV Italia Srl in accordance
with the ISO 9001 standard. Peg Pérego can make
changes at any time to the models described in this
publication for technical or commercial reasons.
CUSTOMER SERVICE
If any parts of the item get lost or damaged, only use
original spare parts. For any repairs, replacements,
product information, original spare parts and
accessories, contact our Customer Service:
Tel. 0039/039/60.88.610
Email customer.service@martinellimilano.com
- 11 -