Maintenance; Activated Charcoal Filters - EAS ELECTRIC EMRH908VRT-N Guide D'utilisation

MAINTENANCE

OPENING PANEL
 Push the panel first and then pull it to open.
 Clean the outside with a damp cloth and neutral
detergent. Clean the inside using a damp cloth
and neutral detergent; do not use wet clothes or
sponges, or jets of water; do not use abrasive
substances.
GREASE FILTERS
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
 The filters must be cleaned every 2 months of opera-
tion, or more frequently for particularly heavy usage,
and can be washed in a dishwasher.
 Remove the filters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
 Any kind of bending of the filters has to be avoided
when washing them. Before fitting them again into
the hood make sure that they are completely dry.
(The color of the filter surface may change
throughout the time but this has no influence to the
filter efficiency).
 When fitting the filters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION)
These filters are not washable and cannot be regenerated, and must be replaced
approximately every 4 months of operation, or more frequently with heavy usage.
REPLACING THE ACTIVATED CHARCOAL FILTER
 Remove the metal grease filters.
 Remove the saturated activated
charcoal filter. Fit the new filters.
 Replace the metal grease filters.
11
V.7