Toshiba PX1215E-1NAC Manuel De L'utilisateur page 7

Remark E: The series of messages will appear on each computer only
OPERATION
A. Adjusting the Mouse Speed Setting
On Windows Computer:
Click on Start/Settings/Control Panel from the root Window Frame to bring
up the Control Panel and click on the Mouse icon to bring up the Mouse
Setting Pane. Adjust the Speed Setting (using the slider) to the ¼ position
from the slow end. Turn off the Acceleration function if it is available. Save
the setting and exit the Control Panel.
B. Using the Device
1. We suggest the first-time users to start with the "lap-style". That is, hold
the E-Mouse like a pen and put your holding fist on your lap.
2. Keep the bottom of your fist on your lap and rest your elbow firmly
against your body or a stable object. Use the device as if you were
making a drawing on your lap to control the pointer movement on the
computer screen.
3. Adjust the mouse speed setting as needed (Refer to subsection A of the
OPERATION Section) to make the pointer control operation as
comfortable as possible.
4. Once you are used to the operation, you can try the E-Mouse on the
desk top or any other surfaces.
C. 3-Stage Power Save Feature
Your E-Mouse has a built-in 3-stage power save feature to maximize the
battery usage. If it stays idle for more than a second, the LED dims and the
E-Mouse goes into Stage One Power Save Mode. In Stage One, the motion
sensor and the buttons remain operational. If the E-Mouse remains idle for
5 minutes in Stage One Power Save Mode, the LED starts flashing and the
E-Mouse enters Stage Two Power Save Mode. In this mode, the motion
sensor and the buttons remain operational.
If the E-Mouse remains idle for 60 minutes in Stage Two Power Save
Mode, the LED turns off and the E-Mouse enters Stage Three Power Save
Mode. In this mode the motion sensor is turned off but the buttons remains
operational.
Remark F: Clicking the mouse button in any Power Save mode will bring
D. Turning Power On/Off
To turn off the power of the handheld unit, press down the Left Button and
the Right Button at the same time for 10 seconds and wait for the Blue LED
to turn off.
User Manual
once, when it receives the E-Mouse dongle the first time.
the E-Mouse to the normal Mouse Mode immediately.
7