Setting The Clock; Setting The Alarm - KIDS BIGBEN RKIDS Mode D'emploi

1. LED display
2. Button + right arm
3. Button - left arm
4. Right ear switch (lighting)
5. Left ear switch (alarm)
6. Night light
7. Mains socket input
8. Volume control
9. Alarm setting button
10. Time setting button
11. Music selection button
Features and operation
1. Connect the mains adapter to the product (7).
2. Connect the AC adapter to your wall socket.
3. The LED display shows "HELLO".

Setting the clock

1. Press the time setting button (10) for 2-3 seconds. The hours begin to flash on the clock
display. Press the + or - buttons on the arms to increase or decrease the hours.
2. Quickly press the time setting button again to change the minutes. The minutes begin to
flash on the clock display. Press the + or - buttons on the arms to increase or decrease
the minutes.
3. Quickly press the same time setting button to choose 12hr or 24hr mode. Press the
button on the arm to choose between the two modes. Quickly press the time setting
button again to complete the setting. If 12hr mode is selected, the AM or PM icon will
appear on the screen.

Setting the alarm

1. Press the alarm setting button (9) for 2-3 seconds. The hours begin to flash on the clock
display. Press the + or - buttons on the arms to increase or decrease the hours.
2. Quickly press the alarm setting button again to change the minutes. The minutes begin to
flash on the clock display. Press the + or - buttons on the arms to increase or decrease
the minutes.
3. The alarm time will automatically adjust to 12hr or 24hr mode, depending on what the
user has previously chosen.
4. Once the alarm is set, short press the alarm button to see what time the alarm is set for.
The alarm time is displayed for 3 seconds, then returns to the current time.
5. The movable switch on the left ear (5) is used to turn the alarm on or off. When the ear
is vertical, the alarm is off. When the ear is tilted, the alarm is on. When the alarm is
activated, it will play music for a maximum of 2 minutes and then turn off automatically.
Place the ear in the vertical position to manually silence the alarm.
Note: the alarm icon is displayed on the LED screen when the alarm is activated. When the
alarm sounds, the screen displays the message "HELLO", then displays the time again.
- EN 13 -