Technical Data; Declaration Of Conformity - Disty distyNotruf NEO Mode D'emploi

Configuration
LED/tone
mode
Connect with Signal tone, red,
charger LED lights up once
Programming Red and green LED lit
EN
session initiated
Mode
(only after trig-
LED/tone
gering the alarm button!)
Battery capacity Red LED flashes every
low 30 secs, signal tone
Alarm call with corre-
sponding information
Subscribed, Green LED flashes once
registered every 10 secs.
Subscribed, outside Red LED flashes every
the range/no base second
station
DECT connection Green LED lights up
Incoming call Green LED flashes,
signal tone
Range (limit recep- Red LED flashes quickly,
tion range) signal tone
22 Operating instructions

Technical data

DECT – GAP, EN 300 444 (Frequency range and transmission
power: compliant with standards of EU/EFTA/AUS)
Compatible with all consumer DECT/GAP base stations and
all professional DECT systems
Compatible with FRITZ!Box and Speedport Neo
Button for distress calls and operation
LED Power indicator (in two colours)
Microphone and speaker
Operating voltage two batteries, AAA
Standby time: > 1 year | Speaking time: > 4 hours
Interface for programming
USB cable, Type A — USB, Type C
System requirements: Windows 7/8/10
Operating/storage temperature: -10°C to +60°C
Weight approx. 52 g (incl. batteries)
Plastic housing, 57 mm x 56 mm x 25 mm, Colour: anthrazite
Protection class: IP 53
Fixing with two screws

Declaration of conformity

We, disty communications GmbH, declare that
conforms to the basic requirements and other relevant terms of
the 2014/53/EU guidelines (Radio Equipment Directive; RED).
The conformity is confirmed by the CE symbol.
The full declaration of conformity can be viewed on
our website: www.disty.de
Professional users will find additional information in
the service section of our website www.disty.de.
Operating instructions
EN
distyNotruf stationär
23