Maintenance
Dust bin and filters
Dust bin
Empty the dust bin after each
use.
Check that the vacuum
is turned off and unplugged.
Remove the accessories and the
removable wand from the motor
unit for a better grip. Access the
dust bin via the opening on the
underneath and empty it (Figure
1).
NOTE:
•
Take care when opening the dust bin as the dust could fall out on to the floor.
Motor unit
Figure 1
To clean the motor unit, press on the release button to release the
dust bin (Figure 1). Then twist the bin in an anti-clockwise direction.
Carefully remove the dust from the cyclone system and the rubber
retaining ring (Figure 2) using a dry cloth.
Figure 1
Figure 2
15
EN