Publicité
Les langues disponibles
Les langues disponibles
m
WARNING!
Do not allow familiarity with products to
make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless fire starter you will need
an iON+ 24V System battery and charger. See page 13 for
battery and charger options and specifications, or for more
information visit sunjoe.com.
Starting and Stopping
1. Insert the battery in the battery compartment. Push to
make sure it is locked in place (Fig. 4).
Fig. 4
2. Set up a pile of fuel you like – charcoal, twigs and sticks,
wood chips, or logs. Make sure the mode switch is
pushed forward and the fire starter is set in heat + blower
mode, touch the fuel with the tip of the cordless fire starter
nozzle and slide the power switch forward (Fig. 5).
Fig. 5
3. Keep the cordless fire starter aimed towards the same
spot. There should be a glowing spot in about 15 to 30
seconds.
Battery
compartment
Battery pack
Power
switch
Mode
switch
10
4. When the fuel starts to burn, slide the mode switch back
to the blower only mode, and pull the fire starter a few
inches back. Giving it space will help the heated air to
spread out (Fig. 6).
NOTE: Get the grill ready to cook faster by continuing
on blower only mode until the grill reaches the desired
temperature.
Fig. 6
5. When the grill is ready, slide back the power switch to turn
off the fire starter. Remove the battery. Rest the fire starter
on its stand to let it cool down completely.
NOTE: When the machine is shut down the fan will
continue to work for couple seconds to cool down the
machine.
Mode Switch (Fig. 7)
Fig. 7
Mode switch
The fire starter is equipped with 2 working modes:
• Heat + blower mode will heat the air and increase the
temperature around the nozzle tip, therefore ignite the fuel.
• Blower only mode will increase the airflow and spread the
heat after the fuel is ignited, to create strong flame.
Adjust the unit's mode with the mode switch next to the power
switch. Slide it forward to set the fire starter to heat + blower
mode. Slide it backward to set the fire starter to blower only
mode.
Operating Tips
m
DANGER!
Do not operate near explosive or flammable
materials unless extraordinary safety precautions are
observed. The fire starter produces air at extremely high
Publicité
