Assembling The Appliance - Telefunken SJ150 Mode D'emploi

Assembling the appliance

Warning: Never plug in the appliance before assembling the accessories. Always
plug out when disassembling the appliance.
space between the auger and the filter.
assembled before switching on the appliance.
1. Place the filter inside the juicing bowl. Ensure the white
dot on the tp of the filter is aligned with the red dot of the
bowl.
2. Insérez l'hélice à presse au centre du tonneau filtre,
faîtes pivoter l'hélice et la pousser dans l'ouverture jusqu'à
ce qu'elle s'arrête. Insert the auger inside the filter et urn
clockwise until its locking position.
Note : the cover will not close if the auger is not well
assembled.
Warning : ensure your finger is not stucked in the
1. Place the full block on the motor area.
2. Turn clockwise the juicing bowl until its
locking position.
3
Place the cover on top of the
juicing bowl then
clockwise until its locking
point.
Note : ensure that the pin on
the cover is well inserted into
the notch.
Warning : Ensure that all
accessories are
ENGLISH
turn
well